+37069827162
Sekti siuntą
Discounts!The Shop
DT 31/2 – 400cm
€100.22 incl. VAT (21%)
DT31/2-400 - 1-Point Pipe 400cm
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
DT 32/2 – 025cm
€100.22 incl. VAT (21%)
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 22/2 – 100cm
€100.22 incl. VAT (21%)
DT 22-100
The DT22/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 35mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT CUBE 1 M10 black
€101.13 incl. VAT (21%)
The DT31 is a 1-point trussing system, also referred to as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminium tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
Optionally, the system can be extended as desired. Corners, T-branches, angles, and circles are available.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more round off the delivery program.
Add to cart
DT 34 – BPM
€101.13 incl. VAT (21%)
The DT34 series is one of the most popular trussing systems has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm.The system includes only mounted halfcones. Optionally the system can be extended with various lengths, corners, T-branches, angles, and circles. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range. The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 34 – BPF
€102.03 incl. VAT (21%)
The DT34 series is one of the most popular trussing systems has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips. Optionally the system can be extended with various lengths, corners, T-branches, angles, and circles. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range. The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 31/2 – Circle Part – 2m – 90°
€102.93 incl. VAT (21%)
DT 31/2-Circle Part-2m-90dgr - Circle part 90° for 2 meter circle
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
EUROTRUSS Roll Board with 2 x 100 mm Rolls
€103.08 incl. VAT (21%)
The Truss Stacker roller board system combined with the 382100 stacker interface facilitates easy, effortless traverse stacking for safer transport.
The birch ply roller boards are available in versions with 2 x 2, 3 and 4 rollers and are suitable for 3 and 4 point traverses.
Universally suitable for use with 2 x 2, 3 and 4 point traverses Version is made with robust birch plywood With side recesses for running through safety belts Includes 100 mm castors and assembly accessories Ideal stackability for storing/transporting the roller boards, thanks to their stacking recesses
Add to cart
Cable protection bridge Defender COMPACT
€103.50 incl. VAT (21%)
Defender COMPACT 7-channel cable protection bridge. Can be combined with Defender COMPACT BASE part.
- Non-slip, coated cable protector made of black recyclable polyurethane
- 7 channels: 1 channel 28 x 30 mm, 2 channels each 28 x 23 mm, 28 x 27 mm and 28 x 29 mm
- Fire resistance class B2 (DIN 4102)
- Resistant to oil, acids, solvents and petrol
- Dimensions 81 x 42,5 x 3,7 cm; Weight 3,6 kg
- Reliable cable and personnel protection for indoor and outdoor use
- Can be combined with Defender COMPACT BASE part (85103) for larger loads such as forklifts and hoists
- Channels with base (85103): 5 channels 22 x 21 cm
- Weight with base (85103): 7 kg
- Not suitable for vehicular traffic
- TÜV SÜD certified
Add to cart
Reutlinger 66SV III ZW M16i
€103.84 incl. VAT (21%)
The wire rope holder with lateral cable exit, M16 internal thread, safety nut and six-ball gripping mechanism is TÜV certified and has also the test certificate for use in the scope of application DGUV regulation 17 (BGV C1).
Users who use products in event and production sites for scenic representations are obliged to always observe the latest regulations in the area of work safety and accident prevention. The user is responsible for the post-processing.
Add to cart
Reutlinger 66SV III Fork
€104.74 incl. VAT (21%)
The wire rope holder with central cable exit, Fork 16x32, safety nut and six-ball gripping mechanism is TÜV certified and has also the test certificate for use in the scope of application DGUV regulation 17 (BGV C1).
Users who use products in event and production sites for scenic representations are obliged to always observe the latest regulations in the area of work safety and accident prevention. The user is responsible for the post-processing.
Add to cart