+37069827162
Sekti siuntą
Discounts!The Shop
Truss Dolly 12
€179.68 incl. VAT (21%)
The Truss Dolly 12 is a road-ready tool to transport your truss. The platform holds up to 8 pieces of DT 34 truss. It is made from a technical plastic strengthened with fiberglass.
It comes with 4 professional Tente wheels and all assembling parts (Screws, nuts etc).
To staple truss you may use the DT Truss Carrier-29/60.
(picture shows 2 dollies, DT 34/2 truss and truss carriers in use. The dolly comes without accessories)
Add to cart
DT 31/2 – 500cm Black
€179.68 incl. VAT (21%)
DT31/2-500 - 500cm Black
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
DT 22/2 – 350cm
€181.48 incl. VAT (21%)
DT 22-350
The DT22/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 35mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 22/2 – C31V – LD
€182.39 incl. VAT (21%)
The DT22/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 35mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 22/2 – C31H – LD
€182.39 incl. VAT (21%)
The DT22/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 35mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 33/2 – 050cm
€183.29 incl. VAT (21%)
The DT33/2 Series is one of the most sold truss systems in general for its high load capacity and lightweight construction. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
Reutlinger 80SV III Fork
€185.10 incl. VAT (21%)
The wire rope holder with central cable exit, Fork 20x40, safety nut and six-ball gripping mechanism is TÜV certified and has also the test certificate for use in the scope of application DGUV regulation 17 (BGV C1).
Users who use products in event and production sites for scenic representations are obliged to always observe the latest regulations in the area of work safety and accident prevention. The user is responsible for the post-processing.
Add to cart
DT 31/2 – Circle Part – 3m – 90° Black
€185.10 incl. VAT (21%)
DT31/2-Circle Part-3m-90dgr black - Circle part 90° for 3 meter circle, Black
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
Cable protection bridge Defender MINI BLK, 3-channel, black
€185.55 incl. VAT (21%)
Minimum order 5 pcs.
Black Defender MINI BLK 3-channel cable protection bridge.
- Compact, non-slip cable protector made of black, recyclable polyurethane
Black polyethylene cover with secure closure
- Patented, self-cleaning cover hinge
- 3 channels: 1 channel 35 x 35 mm, 2 channels 35 x 30 mm
- Load approx. 2t / 20 x 20 cm
- Fire resistance class B2 (DIN 4102)
- Resistant to oil, acids, petrol and short-term contact with solvents
- Dimensions 105 x 29 x 5 cm; Weight 6 kg
- Reliable protection for cables and personnel for indoor and outdoor use
- Non-vehicle-traffic
- TÜV SÜD certified
Add to cart
Cable protection bridge Defender MINI, 3-channel, yellow/black
€185.55 incl. VAT (21%)
Minimum order 5 pcs.
Yellow/black Defender MINI 3-channel cable protection bridge.
- Compact, non-slip cord protector made of black, recyclable polyurethane
- Yellow polyurethane cover with high warning effect and secure closure
- Patented self-cleaning hinge on the cover
- 3 channels: 1 channel 35 x 35 mm, 2 channels 35 x 30 mm
- Load approx. 2t / 20 x 20 cm
- Class E fire resistance according to DIN EN 13501-1 (applies to B-s1)
- Resistant to oil, acids, petrol and short-term contact with solvents
- Dimensions 105 x 29 x 5 cm; Weight 6 kg
- Reliable protection for cables and personnel for indoor and outdoor use
- Not suitable for vehicle traffic
- TÜV SÜD certified
Add to cart