+37069827162
Sekti siuntą
Discounts!The Shop
DT 33/2 – 050cm Black
€204.96 incl. VAT (21%)
The DT33/2 Series is one of the most sold truss systems in general for its high load capacity and lightweight construction. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips. The matt black coated version can be extended with various standard lengths of 50cm, 75cm, 1m, 1,5m, 2m, 2,5m, 3m, 3,5m, 4m, 4,5m und 5,0 meter (special lengths upon request)
Extensive matt black accessories such as hooks & clamps, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 22/2 – C41V – X
€204.96 incl. VAT (21%)
The DT22/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 35mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Add to cart
DT 31/2 – Circle Part – 1m – 360°
€205.85 incl. VAT (21%)
DT 31/2-Circle-1m-360dgr - Circle 360° for 1 meter circle
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
DT 33/2 – 100cm
€205.85 incl. VAT (21%)
The DT33/2 Series is one of the most sold truss systems in general for its high load capacity and lightweight construction. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Add to cart
DT 31/2 – Circle Part – 4m – 90°
€206.77 incl. VAT (21%)
DT31/2-Circle Part-4m-90dgr - Circle part 90° for 4 meter circle
The DT31/2 is a 1-point trussing system, also referred to as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.
The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.
Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
Add to cart
DT 32/2 – T36H – T
€206.77 incl. VAT (21%)
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminium tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Add to cart
EV E33-2 Aluminium triangular truss 90° two way corner 0,5m
€207.26 incl. VAT (21%)
Type 33-2 aluminium triangular truss. 90° two way corner.
The truss can be connected to the same type of Global Truss, DuraTruss aluminium trusses.
A set of connectors is included.
Add to cart
Cable protection bridge Defender MINI LUX, 3-channel
€207.96 incl. VAT (21%)
Minimum order 5 pcs.
Defender MINI LUX 3-channel cable protection bridge.
- Compact, non-slip cable crossover made of black, recyclable polyurethane
- Ultra-transparent yellow cover for use in the dark with light tubing
- Yellow polyurethane cover with high warning effect and secure closure
- Patented self-cleaning cover hinge
- 3 channels: 1 channel 35 x 35 mm, 2 channels 35 x 30 mm
- Load approx. 2 t / 20 x 20 cm
- Fire resistance class B2 (DIN 4102)
- Resistant to oil, acids, petrol and short-term contact with solvents
- Dimensions 105 x 29 x 5 cm; Weight 6 kg
- Reliable protection for cables and personnel for indoor and outdoor use
- Not suitable for traffic on roads
- TÜV SÜD certified
Add to cart
DT 43/2 – 050cm
€209.48 incl. VAT (21%)
The DT43/2 System is a 3-point truss system that is connected with three conical connectors, bolts and locking pins.
This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The three belt tubes are made of 50mm aluminium tube with 2mm wall thickness and give this system an excellent weight-load capacity ratio. The braces have a diameter of 25mm and a wall thickness of 3mm.
The system can optionally be expanded as required: corners, T-branches, angles, and circles are available. An extensive range of accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Add to cart
