+37069827162
Sekti siuntą
Nuolaidos!Prekių Katalogas
Jei neradote, ko ieškojote, maloniai kviečiame pateiktį individualų užsakymą ir rasime jums puikų sprendimą.
Kabelių apsaugos tiltelis Defender ULTRA L, 2-kanalų
€458.54 kaina su PVM
Mažiausias užsakymas 5 vnt.
2-kanalų kabelių apsaugos tiltelis Defender ULTRA L.
- Tvirta kabelio apsauga, pagaminta iš juodo, perdirbamo poliuretano, skirta reiklioms reikmėms
- Neslystantis, geltonas poliuretano dangtelio gamintojas su dideliu įspėjimo efektu ir saugiu uždarymu
- Patentuotas savaime išsivalantis dangčio vyris
- 4 kanalai: 2 kanalai po 120 x 113 mm ir 33 x 50 mm
- Du kanalai tinka A tipo siurbimo žarnoms ir kelių kontaktų jungtims
- Apkrovimas apytiksl. 5 t / 25 x 30 cm
- Atsparumo ugniai klasė B2 (DIN 4102)
- Atsparus alyvai, rūgštims, benzinui ir trumpalaikiam sąlyčiui su tirpikliais
- Matmenys 70 x 75,6 x 13,9 cm; Svoris 32 kg
- Patikima kabelių, žarnų ir personalo apsauga, skirta naudoti viduje ir lauke
- Sertifikuota TÜV SÜD
Į krepšelį
Kabelių apsaugos tiltelis Defender ULTRA L 2, 2+4-kanalų
€458.54 kaina su PVM
Mažiausias užsakymas 5 vnt.
2+4-kanalų kabelių apsaugos tiltelis Defender ULTRA L2.
- Tvirta kabelio apsauga, pagaminta iš juodo, perdirbamo poliuretano, skirta reiklioms reikmėms
- Neslystantis, geltonas poliuretano dangtelis su dideliu įspėjimo efektu ir saugiu uždarymu
- Patentuotas savaime išsivalantis dangtelio vyris
- 6 kanalai: 2 kanalai 108 x 110 mm, 4 kanalai 25 mm skersmens
- Du kanalai tinka A formos siurbimo žarnoms ir kelių kontaktų jungtims
- Apkrovimas apytiksl. 5 t / 25 x 30 cm
- Atsparumo ugniai klasė B2 (DIN 4102)
- Atsparus alyvai, rūgštims, tirpikliams ir benzinui
- Matmenys 70 x 76,6 x 12 cm
- Svoris 28,295 kg
- Patikima kabelių, žarnų ir personalo apsauga, skirta naudoti viduje ir lauke
- 4 tvirtinimo angos, skirtos montuoti gatvėje su 10 mm Ø
- Sertifikuota TÜV SÜD
Į krepšelį
DT LED Support Steel Base Black
€460.48 kaina su PVM
This LED Support Steel Base from serves as a base unit for all LED Support Systems. The optionally available DT 32/3 2-point trusses are attached to this base unit. The system can be extended up to a maximum of 6 meters width. The three integrated spindles are used to level ground unevenness.
Please note that the LED Support Steel Base must be ballasted accordingly. Use our DT Universal Sandbag 12kg in appropriate quantities!
Į krepšelį
Elektrinių užuolaidų sistemų automatika Glydea Ultra 60 RTS
€461.00 kaina su PVM
GLYDEA ULTRA yra naujas, itin tylus, ypač tvirtas aukščiausios klasės užuolaidų automatizavimo sprendimas, kuris sklandžiai dera su bet kokiu interjeru.
Variklis su integruotu radijo imtuvu. Radio technologija RTS.
Premium segmento RTS variklis iki 60 kg.
Valdymas nešiojamu ar sieniniu pulteliu. Norint valdyti telefonu ar balsu reikalingas TAHOMA priedėlis.
Užuolaidų sistemos paisrinkimas susideda iš 3 žingsnių:
1. Bėgelių ir suvažiavimo pasirinkimas
2. Automatikos pasirinkimas
3. Valdymo pasirinkimas
Bendra užuolaidos sistemos kaina paskaičiuojama susisiekus individualiai.
Susisiekime +370 698 27162 arba gpp@gpp.lt
Į krepšelį
Kabelių apsaugos tiltelis Defender XXL LUX, 5-kanalų
€462.10 kaina su PVM
Mažiausias užsakymas 5 vnt.
5-kanalų kabelių apsaugos tiltelis Defender XXL LUX.
- Tvirta kabelio apsauga, pagaminta iš juodo perdirbamo poliuretano su įmontuotomis nešiojimo rankenomis, pritaikytoms sudėtingoms reikmėms
- Labai skaidrus geltonos spalvos dangtelis, skirtas naudoti tamsoje su šviesiais vamzdeliais
- Neslystantis, geltonas poliuretano dangtelis su dideliu įspėjimo efektu ir saugiu uždarymu
- Patentuotas savaime išsivalantis dangčio vyris
- 5 kanalai: 1 kanalas 60 x 63 mm, 2 kanalai, kiekvienas 61 x 59 mm ir 62 x 65 mm
- Trys kanalai, tinkami C formos žarnų jungtims
- Apkrovimas apytiksl. 5 t / 25 x 30 cm
- Atsparumo ugniai klasė B2 (DIN 4102)
- Atsparus alyvai, rūgštims, benzinui ir trumpalaikiam sąlyčiui su tirpikliais
- Matmenys 70 x 69,6 x 8,7 cm; Svoris 21,4 kg
- Patikima kabelių, žarnų ir personalo apsauga, skirta naudoti viduje ir lauke
- Sertifikuota TÜV SÜD
Į krepšelį
U – Frame Dolly
€463.19 kaina su PVM
Base plate only for the DT U-Frame 50. You can also mount the trussing systems DT34 and DT44. So LED cans and moving heads can be installed freeriding in the room. In combination with the optional wheels the U-Frame Dolly will be an indispensible element on stages and showacts.
Į krepšelį
DT 34/2 – C20 – L60°
€464.09 kaina su PVM
The DT34/2 System is a 4-point truss system that is connected with conical connectors, bolts and locking pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers, circles and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved
Strengths of the truss system:
• High quality aluminum tubes with 50mm diameter
• Easy installation
• Low weight
• Space-saving transport
• For exhibition booth construction and event technology
Į krepšelį
DT 32/2H – Circle Part – 4m – 90°
€465.90 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2V – Circle Part – 4m – 90°
€465.90 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2V – Circle Part – 8m – 45°
€465.90 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2H – Circle Part – 8m – 45°
€465.90 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
