+37069827162
Sekti siuntą
Nuolaidos!
DT 24/2 – C23 – L135°
€285.32 kaina su PVM
The DT24/2 System is a 4-point truss system that is connected with four conical connectors, bolts and locking pins.
This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The four belt tubes are made of 35mm aluminum tube with 2mm wall thickness and give this system an excellent weight-load capacity ratio. Struts have a diameter of 8mm.
The system can optionally be expanded as required: corners, T-branches and angles are available. An extensive range of accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 33/2 – 200cm
€286.22 kaina su PVM
The DT33/2 Series is one of the most sold truss systems in general for its high load capacity and lightweight construction. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market and is TÜV approved.
Į krepšelį
DT 23/2 – T37V
€287.12 kaina su PVM
The DT23 series is a 3-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The three main tubes are made of 35mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The DT 23/2 system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, base plates and much more solutions complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
Kabelių apsaugos tiltelis Defender MIDI 5 LUX, 5-kanalų
€287.97 kaina su PVM
Mažiausias užsakymas 5 vnt.
5-kanalų kabelių apsaugos tiltelis Defender MIDI 5 LUX.
- Tvirta, neslystanti visapusiška kabelio apsauga, pagaminta iš juodo, perdirbamo poliuretano su įmontuotomis rankenomis.
- Labai skaidrus geltonos spalvos dangtelis, skirtas naudoti tamsoje su šviesiais vamzdeliais
- Geltonas poliuretano dangtelis su dideliu įspėjimo efektu ir saugiu uždarymu
- Patentuotas savaime išsivalantis dangčio vyris
- 5 kanalai 34 x 36 mm
- Apkrovimas apytiksl. 5 t / 25 x 30 cm
- Atsparumo ugniai klasė B2 (DIN 4102)
- Atsparus alyvai, rūgštims, benzinui ir trumpalaikiam sąlyčiui su tirpikliais
- Matmenys 87 x 53,8 x 5,5 cm; Svoris 13,5 kg
- Patikima kabelių ir personalo apsauga, skirta naudoti viduje ir lauke
- Sertifikuota TÜV SÜD
Į krepšelį
DT 32/2 – C20V – L60° black
€288.93 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 14/2 – 300cm
€288.93 kaina su PVM
The DT14 system of is a decorative truss system. The DT14 is connected through a conical connection (spigot), trusspin and safetyclip. The DT14 is suitable for shops, displays or even at home as a decorative object. Through a boxcorner you realize 90° angles in all directions. There are several baseplates available for stability and protection of your floor.
Positives:
- Decorative
- Easy to pair with box-corner (MJB)
- Easy installation
- Low weight
- Space saving during transport
Į krepšelį
DT 23/2 – C25R – L90°
€290.74 kaina su PVM
The DT23 series is a 3-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The three main tubes are made of 35mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 8 mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips.
The DT 23/2 system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, base plates and much more solutions complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2 – C44V
€291.64 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market.
Į krepšelį
DT 32/2V – Circle Part – 5m – 45°
€291.64 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2H – Circle Part – 5m – 45°
€291.64 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį
DT 32/2 – C41HX Black
€291.64 kaina su PVM
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
Į krepšelį